Description
High quality finish, one coat lime plaster for interior use on masonry and boards. Lime green solo does not always require a base coat unlike standard lime plasters therefore saving time.
Solo is highly permeable to water vapour and so allows moisture to escape, while also creating a healthier living environment. We mix high quality lime and carefully chosen proportions of low colour sand and chalk, ready in the bag, so all you have to do is just add water. A few minutes mixing using normal tools and Solo lime plaster will mix up to a creamy consistency, ready to go.
Common uses:
- Woodfibre Insulation Boards: simply skim on Solo in 2 passes with mesh in between, around 10 mm thick.
- Plasterboard: standard (non-waterproof) paper faced plasterboards just need scrimming and a coat of about 3 mm.
- Waterproof Plasterboard: seal with an acrylic primer before applying a 3 mm skim of Solo.
- Building Boards: products like Fermacel or Mag Oxide will need a coat of Solo Primer before skimming.
- Lime Undercoats: just key up Ultra or Duro and leave to set, before applying a coat of Solo at 3 to 5 mm thick.
- Old lime plaster: if it is unpainted, apply Solo Primer first before skimming with Solo. Alternatively, Solo Filler can be used to replace both
